Robyn inspired me to get a bunch of new, pretty fonts. Don't you love this fancy one in her kitchen??
Friday, December 11, 2009
Wednesday, December 2, 2009
Magnum Opus Financial.
Brad has the coolest office I have ever seen. Crazy colored walls, a humongous dry erase board, and best of all: his wife and kids are just downstairs.
And the vinyl for his office is finally finished! Check out more about his business here.
And the vinyl for his office is finally finished! Check out more about his business here.
Monday, September 28, 2009
family tree.
Portia asked me to make a gift for her mother's birthday celebration. I think we came up with a winner!
This tree took me quite a while to design and perfect, but here it is at last!! Now that the tree design is complete, I'd love to use it again... it could be made with or without family names on it, and could be smaller or larger than what is shown on Portia's tile.
Friday, September 18, 2009
Application Instructions
Please follow these instructions carefully to ensure a beautifully placed vinyl decal.
1. Clean.
Your surface must be clean, dry, smooth and free of dirt or dust. You can use warm soapy water, and then wipe with a damp cloth followed by a lint free towel, or give it time to air dry completely. You can also clean with isopropyl rubbing alcohol and allow to air dry. (Don't use a cleaner with ammonia in it.)
2. Prepare.
Your vinyl decal is sandwiched between white backing paper and a top layer of transfer tape. Lay the decals on a flat surface, graphic side down. Press firmly over the entire decal sheet with the edge of a squeegee, credit card, or similar object. This helps to firm up the bond between the decal and the transfer tape.
3. Plan.
Decide exactly where you will place your decal on the wall. Cut around individual decals with scissors, if necessary. Make sure the lettering or graphic is straight and centered, or placed exactly where you want it. Now use masking tape to attach the decal to the wall. It works best to run the tape the length of the decal along the top, creating a "hinge."
4. Apply.
Flip your decal up along the hinge and remove the backing paper carefully. (This is the hard part!) If some of the decal is not adhering to the top layer of application tape, rub it again with the squeegee, focusing on the edges, and try again. This takes time and patience with large decals, so don't give up! Once all of the backing paper is off, lower the decal against the wall and slowly use your hand or squeegee to press down on the decal, starting at the top center and working your way towards the edges. Now use your squeegee or credit card to again press firmly on the decal, making it adhere to the wall. Peel back the transfer tape (this works best at a 180 degree angle) to leave the decal on the wall. Again, if the decal is sticking to the transfer tape instead of the wall, rub it very firmly with the squeegee until it stays put.
1. Clean.
Your surface must be clean, dry, smooth and free of dirt or dust. You can use warm soapy water, and then wipe with a damp cloth followed by a lint free towel, or give it time to air dry completely. You can also clean with isopropyl rubbing alcohol and allow to air dry. (Don't use a cleaner with ammonia in it.)
2. Prepare.
Your vinyl decal is sandwiched between white backing paper and a top layer of transfer tape. Lay the decals on a flat surface, graphic side down. Press firmly over the entire decal sheet with the edge of a squeegee, credit card, or similar object. This helps to firm up the bond between the decal and the transfer tape.
3. Plan.
Decide exactly where you will place your decal on the wall. Cut around individual decals with scissors, if necessary. Make sure the lettering or graphic is straight and centered, or placed exactly where you want it. Now use masking tape to attach the decal to the wall. It works best to run the tape the length of the decal along the top, creating a "hinge."
4. Apply.
Flip your decal up along the hinge and remove the backing paper carefully. (This is the hard part!) If some of the decal is not adhering to the top layer of application tape, rub it again with the squeegee, focusing on the edges, and try again. This takes time and patience with large decals, so don't give up! Once all of the backing paper is off, lower the decal against the wall and slowly use your hand or squeegee to press down on the decal, starting at the top center and working your way towards the edges. Now use your squeegee or credit card to again press firmly on the decal, making it adhere to the wall. Peel back the transfer tape (this works best at a 180 degree angle) to leave the decal on the wall. Again, if the decal is sticking to the transfer tape instead of the wall, rub it very firmly with the squeegee until it stays put.
Tuesday, September 15, 2009
application instructions: the video.
When I send someone a vinyl decal, I include a sheet of instructions for how to apply it. I've thought several times that I should make a video, which would be much more clear (and fun!) than just written instructions.
Luckily, lots of people have already made these videos, so I don't have to! Here is a fun one:
Luckily, lots of people have already made these videos, so I don't have to! Here is a fun one:
Thursday, September 10, 2009
Family Definition.
"Family" can be defined in so many ways...
I took some of my favorite definitions and put them together to make a fun tile that was donated to a silent auction. A friend then ordered another one to use as a wedding gift. It would be fun to make series of tiles with different, personalized definitions. Send me your ideal definition, and I can make it into a tile for you! This would also look neat right on the wall.
I took some of my favorite definitions and put them together to make a fun tile that was donated to a silent auction. A friend then ordered another one to use as a wedding gift. It would be fun to make series of tiles with different, personalized definitions. Send me your ideal definition, and I can make it into a tile for you! This would also look neat right on the wall.
Tuesday, September 1, 2009
horseshoe name plates.
My biggest project ever!
This summer, my sister taught riding lessons to some summer campers. Her employer wanted to give a nice little gift to all the camp counselors, so here's what we came up with.
With my fingers crossed, the tiles actually survived the shipping. Hurray!
Thanks, Mackenzie, for letting me take on this project!
This summer, my sister taught riding lessons to some summer campers. Her employer wanted to give a nice little gift to all the camp counselors, so here's what we came up with.
With my fingers crossed, the tiles actually survived the shipping. Hurray!
Thanks, Mackenzie, for letting me take on this project!
Tuesday, August 18, 2009
so blessed.
Sunday, July 19, 2009
baby poems.
Sunday, July 5, 2009
F - A - M - I - L - Y
Wednesday, July 1, 2009
the Sullivan family.
Tuesday, June 30, 2009
nautical nursery.
sisters.
wedding gifts.
Monday, June 22, 2009
first words.
Since we're living in a home-away-from-home this summer, I wanted to put up a few things for my son to look at from his crib. These are simple, but hopefully will help him with some word recognition. (He doesn't look thrilled, but I promise, he likes them!)
I thought the airplane picture was especially cute, and would look good right on the wall of a little boy's room.
I thought the airplane picture was especially cute, and would look good right on the wall of a little boy's room.
Subscribe to:
Posts (Atom)